HC-SR501 / HC-SR505 / 360° Ceiling Mini PIR Motion Sensor Infrared Body Detector

Description

Home
Electronic Component
Chips
Sensor
Arduino Module
Raspberry Pi
HC-SR501 / HC-SR505 / 360° Ceiling Mini PIR Motion Sensor Infrared Body Detector
Popular
Popular
Product Introduction
HC-SR501
Product Type: HC--SR501 Body Sensor Module
Operating voltage range: DC 4.5-20V
Quiescent Current: <50uA
Level output: High 3.3 V /Low 0V
Trigger: L can not be repeated trigger/H can be repeated trigger(Default repeated trigger)
Delay time: 5-200S(adjustable) the range is (0.xx second to tens of second)
Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds
Board Dimensions: 32mm*24mm
Angle Sensor: <100 ° cone angle
Operation Temp: -15-+70 degrees
Lens size sensor: Diameter: 23mm (Default)
Features:
1. the automatic sensor: to enter the sensor output range is high, people leave the sensor range of the automatic delay off high, output low.
2. the photosensitive control (optional, factory is not set) may set the photosensitive control during the day or light intensity without induction.
3. the temperature compensation (optional, factory is not set): In the summer when the ambient temperature rises to 30 ~ 32 ℃, slightly shorter detection range, temperature compensation can be used as a performance compensation.
4. two trigger mode: (can be selected by jumpers) a, can not repeat the trigger: the sensor output high, the delay time is over, the output will automatically become low from high; b, repeatable trigger: the sensor output high after the delay period, if the human body in its sensing range activities, its output will remain high until after the delay will be left high to low (sensor module review Measured activities of each body will be automatically extended after a delay time, and the final event of the delay time Starting point of time).
5. with induction blocking time (the default setting: 2.5S block time): sensor module, after each sensor output (high change Into a low level),you can set up a blockade followed by time period, in this time period the sensor does not accept any sensor signal. This feature can have a "sensor output time" and "blocking time" the interval between the work produced can be applied to detect the interval Products; also inhibit this function during load switching for a variety of interference. (This time can be set at zero seconds - Tens of seconds).
6. the working voltage range: the default voltage DC4.5V-20V.
7. micro-power consumption: static current "50 microamps, especially for battery-powered automatic control products.
8. the output high level signals: types of circuits can be easily and docking.
Package Included:
1 x SR501 Body Sensor Module
HC-SR505
Technical parameters:
Operating Voltage Range: DC4.5-20V
Static current: <60uA
Output level: High 3.3V / Low 0V
Trigger: repeatable trigger (default)
Delay time: Default 8S + -30% (can be customized range of a few tenths - tens of minutes)
PCB Dimensions: 10 * 23mm
Induction angle: <100 degree cone angle
Induction distance: 3 meters
Working temperature: -20 - +80 degrees
Sensor Lens Dimensions: Diameter: 10mm (default)
Package Included:
1 x SR505 PIR Motion Sensor
360° Ceiling Infrared Motion Sensor
1. Power Sourcing:220V-240V/AC
2. Power Frequency:50Hz
3. Ambient Light: 3-2000LUX (Adjustable)
4. Time-delay adjustment: Min. 10+-3sec; Max. 7+-2min.
5. Rated Load:1200W Max. Tungsten; 300W Max. Florescent
6. Detection Range:360°
7. Working Temperature:-10~+40℃
8. Working Humidity:<93%RH
9. Installing Height:2.5m~3.5m
10. Power Consumption:0.45W (Work); 0.1W (Static)
12. Detection Motion Speed:0.6~1.5m/s
Package Included:
1 x Infrared Motion Sensor
Payment
Shipping
Refund
Payment
We accept PayPal only.
But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Refund
All package need to
wait 30 days
(US only n
eed 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.